Table of Contents
Advertisement
Chapter 1
Workflow
This chapter describes the driver settings required to establish a connection between a server with Fujitsu
Fibre Channel cards and an ETERNUS DX/AF.
Workflow
Installing the Fibre Channel Card Driver
Install the driver. Download the proper driver from the Fujitsu web-site as required.
•
"Chapter 2 Installing the Fibre Channel Card Driver" (page 7)
Used for driver installation
•
Documentation provided with the product
-
Creating Various Management Tables
Enter the necessary information in the "WWN Instance Management Table for the Server", "WWN In-
stance Management Table for Storage System", and "Target Binding Table".
"Chapter 4 Setting Up the Server" (page 9)
•
"Appendix A Various Management Table Templates" (page 25)
•
Editing the Configuration File
Set the driver parameters by editing the configuration file.
"Chapter 4 Setting Up the Server" (page 9)
•
"Chapter 6 Required Driver Parameters" (page 22)
•
Check the settings using the "grmpdautoconf" command
•
-
ETERNUS Multipath Driver product manual
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris
5
Copyright 2017 FUJITSU LIMITED
P3AM-3712-15ENZ0
Advertisement
Table of Contents
