Configuration Menu (Config Menu) (Model T656) - Lexmark T650 Service Manual

Configuration menu (CONFIG MENU) (model T656)

Entering Configuration Menu (model T656)
1. Turn off the printer.
2. Press and hold 2 and 6 buttons simultaneously.
3. Turn on the printer.
4. Release the buttons after 10 seconds.
Available menus
Note: Some menus are not available, depending on the configuration of the printer.
Maintenance Counter Value
Reset Maintenance Counter
Print Quality Pages
Reports
• Menu Settings Page
• Event Log
SIZE SENSING
Panel Menus
PPDS Emulation
Factory Defaults
Energy Conserve
Paper Prompts
Envelope Prompts
Action for Prompts
Jobs On Disk
Disk Encryption
Wipe Disk
Font Sharpening
Require Standby
LES App[lications
Key Repeat Initial Delay
Key Repeat Rate
Wiper Message
Clear Custom Status
Touch Exit Config Menu to exit the Configuration Menu, and Resetting the Printer displays. The
printer performs a POR, and the printer returns to the ready mode.
Maintenance Counter Value
See "Maintenance Counter Value" on page 3-49
See "Reset Maintenance Counter" on page 3-50
See "Print Quality Pages" on page 3-51
See "Reports" on page 3-51
See "SIZE SENSING" on page 3-52
See "Panel Menus" on page 3-52
See "PPDS Emulation" on page 3-52
See "Factory Defaults" on page 3-54
See "Energy Conserve" on page 3-54
See "Paper Prompts" on page 3-55
See "Envelope Prompts" on page 3-55
See "Action for Prompts" on page 3-55
See "Jobs On Disk" on page 3-55
See "Disk Encryption" on page 3-56
See "Wipe Disk" on page 3-57
See "Font Sharpening" on page 3-57
See "Require Standby" on page 3-57
See "LES Applications" on page 3-58
See "Key Repeat Initial Delay" on page 3-58
See "Key Repeat Rate" on page 3-58
See "Wiper Message" on page 3-58
See "Clear Custom Status" on page 3-58
Exit
Config Menu
4062-XXX
Previous
Go Back
3-49
Diagnostic aids
Next