Lexmark T650 Service Manual page 110

4062
Error
code or
message
28x.48 Deflector gate
transition to output
x = bin
option not detected
number
Applies to:
StapleSmart finisher
28x.49 Deflector gate
transition to standard
x = bin
bin not detected
number
Applies to:
StapleSmart finisher
28x.50 Left tamper home
position jam
x = bin
number Applies to:
StapleSmart finisher
2-74
Service Manual
Error contents
The sensor (deflector gate HP)
does not detect transition of the
deflector gate to the output
option.
The sensor (deflector gate HP)
does not detect transition of the
deflector gate to the standard
bin.
The left tamper home position
is not detected by the sensor
(left tamper HP)
Description/Action Possible repair actions
1. Check all the connections on
the output option controller
card.
2. Check the sensor (deflector
HP) for damage and replace if
needed.
Go to "SFP stapler assembly
sensor (deflector HP)
removal" on page 4-191.
3. Replace the output option if
problem remains.
1. Check all the connections on
the output option controller
card.
2. Check the sensor (deflector
HP) for damage and replace if
needed.
Go to "SFP stapler assembly
sensor (deflector HP)
removal" on page 4-191.
3. Replace the output option if
problem remains.
1. Check all the connections on
the output option controller
card.
2. Check the tamper drive belt
for damage and replace if
needed.
3. Replace the left tamper
motor assembly.
Go to "SFP stapler assembly
tamper drive motor
assembly removal" on
page 4-181.
4. Replace the sensor (tamper
HP).
Go to "SFP stapler assembly
sensor (tamper HP left and
right) removal" on
page 4-188.
4. Replace the output option if
problem remains.
Previous
Next
Go Back