Lexmark T650 Service Manual page 196

4062
Step
6 Check the heat roll and pressure roll.
Remove the fuser unit assembly.
Is there contamination or cracks on the heat roll and/or
pressure roll?
7 Check the HVPS card assembly for proper connection.
Is the above component properly connected?
8 Perform a print test.
Does the problem remain?
2-160
Service Manual
Check
CAUTION: : Allow
the fuser unit
assembly to cool
down.
Yes No
Replace the Go to step 7.
fuser unit
assembly.
Go to "Fuser
unit assembly
removal" on
page 4-22.
Replace the Replace the
HVPS card connections.
assembly.
Go to "HVPS
card assembly
removal" on
page 4-24.
Contact next Problem solved.
highest level of
tech support.
Previous
Next
Go Back