Lexmark T650 Service Manual page 48

4062
Error
code or
message
59 Incompatible Output
Bin [x]
59 Incompatible Tray [x]
61 Defective Disk
62 Disk Full
80 Routine Maintenance
Needed
2-12
Service Manual
Error contents
An incompatible output bin is
installed. For Output Bin x, x=1,
2, or 3.
Remove the incompatible
output bin and press
clear the message.
Note: If the user installed the
incompatible device to satisfy a
Check Device Connections/
reattach message, the user
should reinstall an associated
compatible option or hot unplug
the option.
An incompatible tray is
installed. For Tray x, x= 2, 3, 4,
or 5.
Remove the incompatible tray
and press
message.
Note: If the user installed the
incompatible device to satisfy a
Check Device Connections/
reattach message, the user
should reinstall an associated
compatible option or hot unplug
the option.
This error code displays when
the printer detects a defective
disk. This error may occur at
power on or during disk format
and write operations. While this
message displays.
This error code displays when
there is not enough free space
on the disk to hold the
resources that have been
requested to be written to the
disk. This message displays for
both resource and PostScript
Disk operators when the disk is
full.
The operator panel displays
this message at each 300K
page count interval. It is
necessary to replace the fuser
assembly, transfer roller,
charge roll, and pick rolls at this
interval to maintain the print
quality and reliability of the
printer. The parts are available
as a maintenance kit. For more
information, go to
maintenance" on page
Description/Action
to
to clear the
"Scheduled
6-2.
Possible repair actions
1. Turn off and unplug the
printer.
2. Remove the incompatible
output option.
3. Plug in the printer, and turn
it on.
1. Turn off and unplug the
printer.
2. Remove the incompatible
trays.
3. Plug in the printer, and turn
it on.
press to clear the
message. The disk is marked
defective and normal printer
operations continue. Disk
operations are not allowed with
a defective disk. The Format
Disk menu is not shown.
TBD
Scheduled maintenance
required.
Refer to chapter 6.
Go to "Preventive
maintenance" on page 6-1.
Previous
Next
Go Back