Configuration Menu (Config Menu); Entering Configuration Menu; Available Menus - Lexmark W840 Service Manual

4024-XXX

Configuration menu (CONFIG MENU)

Entering Configuration Menu

1.
Turn off the printer.
2.
Press and hold
3.
Turn on the printer.
4.
Release the buttons when Performing Self Test displays.
The message CONFIG MENU displays on the top line of the operator panel.

Available menus

Configuration Menu
Maint Cnt Value
Reset Maint Cnt
REGISTRATION
Top Margin
Tray 1 Left Mar
Tray 2 Left Mar
Tray 3 Left Mar (if installed)
Tray 4 Left Mar (if installed)
Tray 5 Left Mar (if installed)
Quick Test
Prt Quality Pgs
SIZE SENSING
Tray 1 Sensing
Tray 2 Sensing
Tray 3 Sensing (if installed)
Tray 4 Sensing (if installed)
Tray 5 Sensing (if installed)
Statement/A5
Executive/B5
Panel Menus
PPDS Emulation
Demo Mode
Factory Defaults
Energy Conserve
EVENT LOG (print log only)
Paper Prompts
Env Prompts
Jobs On Disk (if hard disk is
installed)
Disk Encryption (only if hard disk
is installed and feature is set up)
Font Sharpening
Short-edge Printing
3-20
Printer Service Manual
and .
See "Maintenance page count (Maint Cnt Value)" on page 3-21
See "Maintenance page counter reset (Reset Maint Cnt)" on page 3-21
"REGISTRATION" on page 3-22
See "Top Margin" on page 3-22
See "Tray 1–5 Left Margin" on page 3-22
See "Quick Test" on page 3-23
See "Print quality pages (Prt Quality Pgs)" on page 3-23
See "SIZE SENSING" on page 3-24
See "Statement/A5" on page 3-24
See "Executive/B5" on page 3-24
See "Panel Menus" on page 3-24
See "PPDS Emulation" on page 3-25
See "Demo Mode" on page 3-25
See "Factory Defaults" on page 3-25
See "Energy Conserve" on page 3-25
See "EVENT LOG" on page 3-25
See "Paper Prompts" on page 3-25
See "Env Prompts" on page 3-26
See "Jobs On Disk" on page 3-26
See "Disk Encryption" on page 3-26
See "Font Sharpening" on page 3-26
See "Short Edge Printing" on page 3-26