Lexmark T650 Service Manual page 89

Error
code or Error contents
message
243.69 Pick motor control
failure.
Source = Media tray 3
244.00 Media tray 4 area jam
244.02 Sensor (pass through)
late jam
Source = Tray 4
244.03 Sensor (pass through)
late jam
Source = Tray 4
244.04 Sensor (pass through)
late jam
Source = Tray 4
244.05 Sensor (pass through)
late jam
Source = Tray 4
244.06 Sensor (pass through)
late jam
Source = Tray 4
244.08 Sensor (pass through)
lingering jam
Source = Tray 4
Description/Action
The pick motor does not reach
the proper operating speed at
the specified time.
The media is jammed in the
media tray 4 area.
The media is late reaching the
sensor (pass through) within
the specified time.
The media is late reaching the
sensor (pass through) within
the specified time.
The media is late reaching the
sensor (pass through) within
the specified time.
The media is late reaching the
sensor (pass through) within
the specified time.
The media is late reaching the
sensor (pass through) within
the specified time.
Media reached the sensor
(pass through) within the
specified time but did not clear
it within the specified time.
Possible repair actions
1. Remove all media present
in media path.
2. Ensure media tray is not
overfilled.
3. Check all connections on
the pick arm assembly.
4. Check all connections on
the system card assembly.
5. Replace the pick arm
assembly if problem
remains. Go to "Pick arm
assembly removal" on
page 4-54.
6. Replace system card
assembly if problem
remains. Go to "System
card assembly removal"
on page 4-75.
1. Remove all media present
in media path.
2. Check media for proper
installation.
3. Check for obstructions in
media path.
Go to sensor (pass through)
late jam service check.
See "Sensor (pass through)
late jam service check" on
page 2-137.
Go to sensor (pass through)
late jam service check.
See "Sensor (pass through)
late jam service check" on
page 2-137.
Go to sensor (pass through)
late jam service check.
See "Sensor (pass through)
late jam service check" on
page 2-137.
Go to sensor (pass through)
late jam service check.
See "Sensor (pass through)
late jam service check" on
page 2-137.
Go to sensor (pass through)
late jam service check.
See "Sensor (pass through)
late jam service check" on
page 2-137.
Go to sensor (pass through)
lingering jam service check.
See "Sensor (pass through)
lingering jam service check."
on page 2-138.
Diagnostic information
4062
Previous
Next
Go Back
2-53