4062-XXX
High capacity input tray (HCIT) cover, right removal
Note: Carefully remove the base machine from the HCIT tray assembly before proceeding.
Note: Before removing the HCIT right cover, first remove the right side anti-tip latch assembly. Go to
capacity input tray (HCIT) anti-tip latch assembly removal" on page
1. Remove the High capacity input tray (HCIT) cover, rear. Go to
rear removal" on page
2. Remove the four screws (A) securing the HCIT cover, right to the drawer.
4-120
Service Manual
4-118.
A
4-123.
"High capacity input tray (HCIT) cover,
A
Previous
"High
Next
Go Back