Lexmark T650 Service Manual page 139

Error
code or Error contents
message
936.10 Main drive motor
assembly failure
No halls detected at
motor start.
Motor = type 0
936.11 Main drive motor
assembly failure
No halls detected at
motor start.
Motor = type 1
936.20 Main drive motor
assembly failure
Failed to stop within
timeout.
Motor = type 0
936.21 Main drive motor
assembly failure
Failed to stop within
timeout.
Motor = type 1
Description/Action
The main drive motor assembly
may be faulty or has failed.
The main drive motor assembly
may be faulty or has failed.
The main drive motor assembly
may be faulty or has failed.
The main drive motor assembly
may be faulty or has failed.
4062
Possible repair actions
1. Check all connections on
the system card assembly.
2. Check all connections on
the main drive motor
assembly.
3. Replace the main drive
motor assembly. Go to
"Output cover assembly
removal" on page 4-53.
4. Replace the system card
assembly if problem
remains. Go to "System
card assembly removal"
on page 4-75.
1. Check all connections on
the system card assembly.
2. Check all connections on
the main drive motor
assembly.
3. Replace the main drive
motor assembly. Go to
"Output cover assembly
removal" on page 4-53.
4. Replace the system card
assembly if problem
remains. Go to "System
card assembly removal"
on page 4-75.
1. Check all connections on
the system card assembly.
2. Check all connections on
the main drive motor
assembly.
3. Replace the main drive
motor assembly. Go to
"Output cover assembly
removal" on page 4-53.
4. Replace the system card
assembly if problem
remains. Go to "System
card assembly removal"
on page 4-75.
1. Check all connections on
the system card assembly.
2. Check all connections on
the main drive motor
assembly.
3. Replace the main drive
motor assembly. Go to
"Output cover assembly
removal" on page 4-53.
4. Replace the system card
assembly if problem
remains. Go to "System
card assembly removal"
on page 4-75.
2-103
Diagnostic information
Previous
Next
Go Back