4062-XXX
6. Disconnect the connection (B) from the main drive motor assembly.
Replacement Warning: Ensure that all electrical connections are properly replaced.
Replacement Warning: When replacing the main drive motor assembly, ensure that the operator panel door
assembly is in the closed position or the main drive motor assembly will not align properly and damage will
occur.
Replacement Warning: When replacing the main drive motor assembly, ensure that all gears and drive
shafts are properly aligned, or damage will occur.
Media out actuator removal
1. Remove the pick arm assembly. Go to
2. Release the hook (A) securing the media out actuator to the unit.
3. Remove the media out actuator.
4-34
Service Manual
A
"Pick arm assembly removal" on page
B
A
4-54.
Previous
Next
Go Back