Lexmark T650 Service Manual page 56

4062
Error
code or
message
201.27 Sensor (fuser output)
late jam.
Type 2 fuser
201.28 Image data did not
start in time
Type 2 fuser
201.29 Sensor (narrow
media) late jam
Type 2 fuser
201.30 Operator panel door
assembly interlock
switch failure
Type 2 fuser
201.31 Sensor (narrow
media) late jam
Type 2 fuser
201.32 Sensor (fuser output)
late jam
Type 2 fuser
201.50 Sensor (fuser output)
late jam
Type 1 fuser
Fuser page count has
exceeded life.
2-20
Service Manual
Error contents
The media is late reaching the
sensor (fuser output) within the
specified time.
Printhead write failure
The expected wide media is
late reaching the sensor
(narrow media) within the
specified time.
The printer detected that the
operator panel door interlock
switch did not cycle prior to
printer restart.
The expected wide media is
late reaching the sensor
(narrow media) within the
specified time.
The media is late reaching the
sensor (fuser output) within the
specified time.
The media is late reaching the
sensor (fuser output) within the
specified time.
Description/Action Possible repair actions
Go to sensor (fuser output) late
jam service check.
See "Sensor (fuser output)
late jam service check." on
page 2-127.
If problem remains, a type 2
fuser can be installed.
1. Check all connections on the
printhead assembly
2. Check all connections on the
system card assembly.
3. Replace the printhead
assembly if problem remains.
4. Replace the system card
assembly if problem remains.
Go to "System card
assembly removal" on
page 4-75.
Go to sensor (narrow media)
late jam service check.
See "Sensor (narrow media)
late jam service check." on
page 2-131.
1. Remove all media present
in media path.
2. Ensure that the operator
panel door assembly is fully
open then fully closed.
3. Check operator panel door
assembly for damage.
4. Check interlock switch (in
left operator panel hinge)
for damage.
5. Check all connections on
the system card assembly.
Go to sensor (narrow media)
late jam service check.
See "Sensor (narrow media)
late jam service check." on
page 2-131.
Go to sensor (fuser output) late
jam service check.
See "Sensor (fuser output)
late jam service check." on
page 2-127.
Go to sensor (fuser output)
service check.
See "Sensor (fuser output)
service check" on
page 2-118.
Previous
Next
Go Back