Lexmark T650 Service Manual page 76

4062
Error
code or
message
239.07 Select output device
error.
Source = External
duplex
239.08 Input source ready
error.
Source = External
duplex
239.11 Sensor (input) late
jam from duplex
Source = External
duplex
241.00 Media tray 1 area jam
Source = Tray 1
2-40
Service Manual
Error contents
Mechanical feed error or timing
error.
Mechanical feed error or timing
error.
Media is late reaching the
sensor (input) within the
specified time during the
second side printing using the
external duplex.
The media is jammed in the
media tray 1 area.
Description/Action Possible repair actions
1. Remove all media present
in media path.
2. Check media for proper
installation.
3. Check for obstructions in
media path.
4. Ensure the external duplex
assembly is properly
installed.
5. Ensure the rear door of the
external duplex is fully
closed.
6. Check all connections on
the external duplex
assembly.
7. Replace the external
duplex assembly if problem
remains.
1. Remove all media present
in media path.
2. Check media for proper
installation.
3. Check for obstructions in
media path.
4. Ensure the external duplex
assembly is properly
installed.
5. Ensure the rear door of the
external duplex is fully
closed.
6. Check all connections on
the external duplex
assembly.
7. Replace the external
duplex assembly if problem
remains.
Go to sensor (input) late jam
service check.
See "Sensor (input) late jam
service check." on
page 2-121.
1. Remove all media present
in media path.
2. Check media for proper
installation.
3. Check for obstructions in
media path.
Previous
Next
Go Back