Seat - Otto Bock Dino 3 Service Manual

5.3 Seat

Replacing the seat
Open the quick-release lock of the back angle ad-
justment (A) and fold the back down onto the seat.
Disassemble the back (refer to section 5.4) and the
footrest assemblies (refer to section 5.2).
A
Loosen and remove the screw connection (A) be-
tween the seat and frame.
A
Manually unscrew the gas comression spring from
the cross tube (B) and slowly put down the seat tilt
mechanism and seat.
Carefully push out the bushings using a pin punch.
For reassembly, please proceed in reverse order.
Use new, self-locking nuts.
B
15