Dino 3 - Maintenance Plan - Otto Bock Dino 3 Service Manual

4 Maintenance Plan
Maintenance Plan
for regular service
Item
Component (group)
Serial no.:
1 Frame
Frame accessories
2 Footrests
Footrest accessories
3 Seat
Interface adapters
Seat accessories
4 Back / push handle
Back accessories
5 Side panel
6 Caster
7 Rear wheel
Rear wheel accessories
8 Wheel lock
Wheel lock accessories
9 Accessories
Do the settings of the mobility
base comply with the user's
requirements?
Maintenance performed by:
6
Dino 3
Mobility Base for Seating Shells
Inspection (check list)
1.)
Function / setting
- Frame
- Anti-tipper
- Tip-assist
- Flip-up mechanism
- Lower leg length setting
- Angle adjustment
- Locking device for single-panel
footrest
- Heel band for individual footrests
- Seat
- Seat tilt
- Back angle adjustment
- Type "Parallel"
- Type "Trapezoid"
- Type "Ortho-Seat 2"
- Type "Shape / Moss"
- Type "Dräger"
- Type "R82/Atoform"
- Type "InterCo"
- Adapter for pre-tilt of the seat
- Back
- Height adjustment of the push
handles/ push bar
- Push handles
- Rubber hand grips (strength)
- Pushbar
- Pushbar with ratchet joint
- Back guide for seating shell back
- Wheel cover
- Clothing protector
- Height adjustment of the
armrests
- Tires (wear)
- Air pressure
- Screw connection to the frame
- Running behavior of the wheels
- Swiveling of the caster forks
- Tires (wear)
- Air pressure
- Running behavior of the wheels
- Spokes
- Quick-release axles
- Spoke protectors
- Wheel lock
- Reverse-roll lock
- Wheel lock lever extension
- Seating shell interface
- Footrest at seating shell interface
- Trapezoid adaption for seating
shells
on:
Customer:
2.)
Damages / Screw connections
deformations
3.)