Side Panel - Otto Bock Dino 3 Service Manual

Note: The package includes longer
screws and spacers for mounting of the
attachment block.
Hold the attachment block and unscrew the wing
nut counter-clockwise. Now you can individually
change the distance between the back guide and
the seating shell back.

5.5 Side Panel

Retrofitting the clothing protector 471E42=PK025
Remove the rear wheels (22"/24").
Disassemble the drum brake from the rear wheel
adapter (refer to section 5.7).
Disassemble the rotation protection of the drum
brake and replace it with the clothing protector
holder.
Finally reassemble the drum brake to the rear wheel
adapter.
24
NOTE: Always turn the connection clockwise for
opening and closing to prevent the wing nut from
unscrewing.
Replacing / Setting the plastic part of the
clothing protector
Loosen and remove the two screw connections
which connect the plastic part to the holder and
replace the plastic part.
The two pairs of holes are intended to match 22" or
24" rear wheels respectively.