Foundry NetIron M2404C and M2404F Metro Access Switches
Example 1
The following example shows how to display the currently configured aging time:
device-name#show mac-address-table aging-time
aging time is 1500 seconds
Example 2
The following example shows how to display the currently configured "no aging time":
device-name#show mac-address-table aging-time
aging is off
Additional MAC Address Commands
Preventing MAC-Based DoS Attacks Command
Table 6
lists the command for preventing MAC-based DoS attacks.
The DoS attack is detected by the reception of packets with source MAC address that is a multicast
or broadcast address.
Table 6: MAC-Based DoS Attack Prevention Command
Command
mac-address-table
prevent-dos-attack
Enabling DoS Attack Prevention
The mac-address-table prevent-dos-attack command, in Global Configuration mode, enables
DoS attack prevention. The no form of the command disables DoS attack prevention.
By default, the DoS attack prevention is enabled.
Command Syntax
device-name(config)#mac-address-table prevent-dos-attack
device-name(config)#no mac-address-table prevent-dos-attack
Disabling Learning of New MAC Addresses Commands
Table 7
lists the commands for disabling learning of new MAC addresses in the MAC address
table.
Table 7: Disabling MAC-address Learning Commands
Command
learning new-address
Managing the MAC Address Table
Description
Enables DoS attack prevention.
Description
Enables/disables learning of new MAC addresses globally.
© 2008 Foundry Networks, Inc.
Switch Administration (Rev. 03)
Page 15 of 87