Overview - Foundry Networks NetIron M2404C User Manual

Foundry NetIron M2404C and M2404F Metro Access Switches

Overview

The configuration program uses a CLI (Command Line Interface) that enables the user to start
using the device quickly and without extensive background knowledge. It does this by prompting
the user for the information required to perform basic configuration procedures.
The device can run with the default factory parameters. After changing the default factory
parameters, be sure to save the changes in the NVRAM.
Overview © 2008 Foundry Networks, Inc.
Using the Command Line Interface (Rev. 03)
Page 2 of 12