Configuring Dynamic Vlans - Foundry Networks NetIron M2404C User Manual

Foundry NetIron M2404C and M2404F Metro Access Switches
•
Adding ports to a VLAN
•
Removing ports from a VLAN
•
Adding a VLAN as PVID to ports
•
Restoring the port VIDs to VLAN ID 1 (the default VLAN)
•
Attaching a subnet to a VLAN
•
Setting VLANs as management VLANs and more.
Command Syntax
device-name(config)#vlan
device-name(config vlan)#
Entering Specific VLAN Configuration Mode
The config command, in VLAN Configuration mode, changes the configuration mode to a Specific
VLAN Configuration mode specified by name in the command argument. The user can also use
this command in a Specific VLAN Configuration mode to device to the Configuration mode of
another VLAN.
Command Syntax
device-name(config vlan)#config NAME1
device-name(config-vlan NAME1)#
device-name(config-vlan NAME1)#config NAME2
device-name(config-vlan NAME2)#
Argument Description
NAME1, NAME2
Example 1
The following example shows how to enter into vlan_52 VLAN Configuration mode from Global
VLAN Configuration mode, as indicated by the prompt-line:
device-name(config vlan)#config vlan_52
device-name(config-vlan vlan_52)#
Example 2
The following example shows how to device from vlan_52 Configuration mode to XYZ
Configuration mode, as indicated by the prompt-line:
device-name(config-vlan vlan_52)#config XYZ
device-name(config-vlan XYZ)#

Configuring Dynamic VLANs

The config dynamic command, in VLAN Configuration mode, changes the configuration mode to
the Specific VLAN Configuration mode of the VLAN ID specified in the command argument.
The user can also use this command in a Specific VLAN Configuration mode to device the
Configuration mode to another VLAN.
Virtual LANs
Represent the names of existing VLANs.
© 2008 Foundry Networks, Inc.
Configuring VLANs (Rev.03)
Page 11 of 73