Foundry NetIron M2404C and M2404F Metro Access Switches
<Ctrl+]>
Example
device-name#telnet 192.0.103.13
connecting to 192.0.103.13...
current session is 4.
...
device-name(config)#<ctrl+shift+6>
choose session to switch to:
the current session is 4
your sessions are 0 4 > 0
current session is 0.
Configuration Example
The following example shows how to restrict Telnet connections to one IP address.
1. Set the named access list to allow Telnet only for the management station
(212.192.50.2):
device-name(config)#access-list Management permit 212.192.50.2/32
2. Enter into VTY Configuration mode:
device-name(config)#
3. Set the named access list to the VTY:
device-name(config-vty)#
4. Set the VTY timeout to be one hour:
device-name(config-vty)#
device-name(config-vty)#
5. Display the currently open sessions connected to the switch:
device-name#who
Codes: > - current session, * - configuring
vty on console connected on console.
VTY (Virtual Telnet Type) Commands
Figure 5: Telnet Server Example
line vty
Management
access-class
exec-timeout 60
end
© 2008 Foundry Networks, Inc.
Switch Setup and Maintenance (Rev. 03)
Page 23 of 35