Configuring And Displaying Device-Management Ports - Foundry Networks NetIron M2404C User Manual

Foundry NetIron M2404C and M2404F Metro Access Switches
Table 6: Interface Clearing Statistics Commands
Command
reset
clear interface
statistics
Clearing the Port Statistics
The reset command, in Interface Configuration mode, clears the statistics of the configured port. If
the keyword all is specified, the command clears the statistics of all the ports.
Command Syntax
device-name(config-if UU/SS/PP)#reset [all]
Argument Description
all
Clearing All Ports Statistics
The clear interface statistics command, in Privileged (Enable) mode, clears the statistics of all
physical interfaces.
Command Syntax
device-name#clear interface statistics

Configuring and Displaying Device-Management Ports

Table 7 lists the commands for configuring and displaying the ports allowing management to be
performed on the device.
Table 7: Device-Management Ports Commands
Command
port management
show port management
NOTE
Fast Ethernet and Giga Ethernet Port
Description
Clears the statistics of the configured interfaces.
Clears the statistics of all interfaces.
(Optional). Clears the statistics of all the ports
Description
Controls access to device management on specified ports.
Displays which ports provide management access.
By default the port management is enabled on all ports.
© 2008 Foundry Networks, Inc.
Configuring Interfaces (Rev. 03)
Page 19 of 57