Cj1W-B7A04; Cj1W-B7A22; Transmission Delay Switch - Omron NJ501-1 Series User Manual

3 Configuration Units
Indicator
ERR3 Port 3
transmis-
sion error
ERR4 Port 4
transmis-
sion error
 CJ1W-B7A04
B 7 A 0 4
R U N
Indicator
RUN B7A operat-
ing status
 CJ1W-B7A22
B 7 A 2 2
R U N
E R R 1
E R R 2
Indicator
RUN B7A operat-
ing status
ERR1 Port 3
transmis-
sion error
ERR2 Port 4
transmis-
sion error

Transmission Delay Switch

3 ms
Name
Transmission delay switch
Note The switch setting is read when the power supply is turned ON. If the switch setting is changed after turning
ON the power supply, the new setting is not used.
3-28
Name Color Status
Red Lit
Not lit
Red Lit
Not lit
C J
Name Color Status
Green Lit
Not lit
C J
Name Color Status
Green Lit
Not lit
Red Lit
Not lit
Red Lit
Not lit
19 ms
The same baud rate is set for all ports using
this one switch.
Right: Standard (19.2 ms typical)
Left: High-speed (3 ms typical)
Condition
A transmission error has occurred at
port 3 of the B7A Unit.
The Unit is operating normally.
A transmission error has occurred at
port 4 of the B7A Unit.
The Unit is operating normally.
Condition
The B7A Unit is operating.
The B7A Unit is stopped.
Condition
The B7A Unit is operating.
The B7A Unit is stopped.
A transmission error has occurred at
port 3 of the B7A Unit.
The Unit is operating normally.
A transmission error has occurred at
port 4 of the B7A Unit.
The Unit is operating normally.
Function
NJ-series CPU Unit Hardware User's Manual (W500)
Factory setting
Standard