Din Track Installation - Omron NJ501-1 Series User Manual

4 Installation and Wiring
4-3-3

DIN Track Installation

Use the following procedure to install an NJ-series Controller on DIN Track.
1
Release the pins on the backs of the NJ-series Units.
DIN Track
mounting pins
2
Fit the back of the Controller onto the DIN Track by inserting the top of the track and then press-
ing in at the bottom of the Controller, as shown below.
(2)
3
Lock the pins.
4-16
Release
(1)
DIN Track
DIN Track
mounting pins
NJ-series CPU Unit Hardware User's Manual (W500)