Basic Input Units With Terminal Blocks - Omron NJ501-1 Series User Manual

Appendices
A-2-2 Basic I/O Units

Basic Input Units with Terminal Blocks

 CJ1W-ID201 DC Input Unit (12 to 24-VDC, 8 Points)
Name
Model
Rated Input Voltage
Allowable Input Voltage Range
Input Impedance
Input Current
ON Voltage/ON Current
OFF Voltage/OFF Current
ON Response Time
OFF Response Time
Number of Circuits
Number of Simultaneously ON Points 100% simultaneously ON
Insulation Resistance
Dielectric Strength
Internal Current Consumption
Weight
Circuit Configuration
External connection and terminal-
device variable diagram
The ON response time will be 20 s maximum and OFF response time will be 400 s maximum even if the response time are set to 0 ms
*1
due to internal element delays.
*2 Terminal numbers A0 to A8 and B0 to B8 are used in the external connection and terminal-device variable diagrams. They are not
printed on the Units.
A-6
8-point DC Input Unit with Terminal Block
CJ1W-ID201
12 to 24 VDC
10.2 to 26.4 VDC
2.4 k
10 mA typical (at 24 VDC)
8.8 VDC min./3 mA min.
3 VDC max./1 mA max.
8.0 ms max. (Can be set to between 0 and 32 ms in the Unit Information settings.)
8.0 ms max. (Can be set to between 0 and 32 ms in the Unit Information settings.)
8 independent circuits
20 M between external terminals and the GR terminal (100 VDC)
1,000 VAC between the external terminals and the GR terminal for 1 minute at a leakage current
of 10 mA max.
80 mA max.
110 g max.
Signal name
2.4 kΩ
Jxx_Ch1_In00
COM0
to
2.4 kΩ
Jxx_Ch1_In07
COM7
Con-
Signal
nector
name
pin
C0
A0
C1
A1
C2
A2
C3
A3
C4
A4
C5
A5
C6
A6
C7
A7
NC
A8
Polarity of the input power supply can be connected in either direction.
Input indicator
Input indicator
Signal
name
*2
Jxx_Ch1_In00
B0
Jxx_Ch1_In01
B1
Jxx_Ch1_In02
B2
Jxx_Ch1_In03
B3
Jxx_Ch1_In04
B4
Jxx_Ch1_In05
B5
Jxx_Ch1_In06
B6
Jxx_Ch1_In07
B7
NC
B8
NJ-series CPU Unit Hardware User's Manual (W500)
*1
*1
12 to 24 VDC