Version Information; Using An Lower Sysmac Studio Version; Relationship Between Unit Versions Of Cpu Units And Sysmac Studio Versions - Omron NJ501-1 Series User Manual

Appendices
A-8

Version Information

This section describes the relationship between the unit versions of CPU Units and the Sysmac Studio
versions, and the functions that are supported for each unit version.
A-8-1 Relationship between Unit Versions of CPU Units and Sysmac
Studio Versions
This section describes how the unit versions of CPU Units correspond to Sysmac Studio versions. Nor-
mally use the corresponding versions.
Unit Versions and Corresponding Sysmac Studio Versions
The following table gives the relationship between unit versions of CPU Units and the corresponding
Sysmac Studio versions.
Unit version of CPU Unit
Ver.1.08
Ver.1.07
Ver.1.06
Ver.1.05
Ver.1.04
Ver.1.03
Ver.1.02
Ver.1.01
*1
Ver.1.00
*1 There is no NJ301- CPU Unit with unit version 1.00. Therefore, you cannot use an NJ301-
CPU Unit with Sysmac Studio version 1.01 or lower.
Specifications When Not Using the Sysmac Studio Version That
Corresponds to the Unit Version of the CPU Unit
The specifications when you do not use the Sysmac Studio version that corresponds to the unit version
of the CPU Unit are given in this section.
 Using an Lower Sysmac Studio Version
If you use a lower version of the Sysmac Studio, you can use only the functions of the unit version of
the CPU Unit that corresponds to the Sysmac Studio version.
Example: Unit version of CPU Unit: 1.04
Sysmac Studio version: 1.04
Unit version 1.03 of the CPU Unit corresponds to Sysmac Studio version 1.04. There-
fore, you can use only the functions that are supported by unit version 1.03 of the CPU
Unit. You cannot use functionality that was added for unit version 1.04 or later of the
CPU Unit.
A-124
Corresponding version of Sysmac Studio
Ver.1.09
Ver.1.08
Ver.1.07
Ver.1.06
Ver.1.05
Ver.1.04
Ver.1.03
Ver.1.02
Ver.1.01
Ver.1.00
NJ-series CPU Unit Hardware User's Manual (W500)