6.1: Introduction
You can use the Elements and Buttons on the Shark
configure the meter, and perform related functions. The following sections explain the Elements and Buttons and
detail their use.
6.1.1: Understanding Meter Face Elements
The meter face features the following elements:
• Reading Type Indicator:
Indicates Type of Reading
• Parameter Designator:
Indicates Reading Displayed
• Watt-Hour Test Pulse:
Energy Pulse Output to Test Accuracy
• Scaling Factor:
Kilo or Mega multiplier of Displayed Readings
• % of Load Bar:
Graphic Display of Amps as % of the Load
(Refer to Section 6.3 for additional information.)
• IrDA Communication Port:
Com 1 Port for Wireless Communication
6.1.2: Understanding Meter Face Buttons
The meter face has Menu, Enter, Down and
Right buttons, which allow you to perform the
following functions:
• View Meter Information
• Enter Display Modes
• Configure Parameters (may be Password Protected)
• Perform Resets (may be Password Protected)
• Perform LED Checks
• Change Settings
• View Parameter Values
• Scroll Parameter Values
• View Limit States
e
Electro Industries/Gauge Tech
Chapter 6
Using the Shark
®
% of Load Bar
Doc# E149701
®
200 Meter
200 meter's face to view meter readings, reset and/or
IrDA
Reading Type
Communication
Indicato
Port
Figure 6.1: Face Plate with Elements
Menu
Down
Figure 6.2: Face Plate with Buttons
r
Parameter
Designator
Watt-Hour
Test Pulse
Scaling
r
Facto
Enter
Right
6-1