Table of Contents
Advertisement
8.1: Overview
When you install the optional Ethernet card in your Shark ® 200 meter, you gain the capability of communicating
over the Ethernet medium using EIG's Rapid Response™ technology.
8.2: Hardware Connection
The Ethernet card fits into either of the two Option Card slots in the back of the Shark ® 200 meter. Refer to the
1.
instructions in Chapter 7 for card installation.
2. Use a standard RJ-45 10/100BaseT cable to connect to the Ethernet card.
The card autodects cable type and will work with either straight or crossover cable.
e
Electro Industries/Gauge Tech
Chapter 8
Using the Ethernet Card (INP100S)
Figure 8.1: Shark
®
200 meter with Ethernet Card
Doc# E149701
RJ-45 Cable
Connects Here
8-1
Advertisement
Table of Contents
