Table of Contents
Advertisement
2.1.2: Ordering Information
Shark200 - 60 - 10- V2- D -INP100S - X
1
1. Model:
Shark ® 200 Meter/Transducer
Shark ® 200T Transducer (no display)
2. Frequency:
-50: 50 Hz System
-60: 60 Hz System
3. Current Input:
-10: 5 Amp Secondary
-2: 1 Amp Secondary
4. V-Switch™ Key Pack:
-V1: Multifunction meter only
-V2: Above, with 2 MegaBytes datalogging memory
-V3: Above, with %THD
-V4: Above, with limit and control functions
-V5: Above, with 3 MegaBytes datalogging memory and 64 samples per cycle wavefrom recorder
-V6: Above, with 4 MegaBytes datalogging memory and 512 samples per cycle waveform recorder
See Section 2.1.3 for more information and instructions on obtaining a V-Switch™ key.
5. Power Supply:
-D2 Option: Universal, (90 to 265) VAC @50/60Hz or (100 to 370) VDC
-D Option: (18-60) VDC
6 and 7. I/O Slots 1 and 2: (See Chapter 7 for I/O Card Specifications.)
-X: None
-INP100S: 100BaseT Ethernet
-RO1S: 2 Relay Outputs/2 Status Inputs
-PO1S: 4 Pulse Outputs/4 Status Inputs
-1mAOS: 4 Channel Analog Output 0-1 (Bidirectional)
-20mAOS: 4 Channel Analog Output 4-20mA
-FOSTS: Fiber Optic Output ST Terminated
-FOVPS: Fiber Optic Output Versatile Link Terminated
Example:
Shark200-60-10-V2-D-INP100S-X
(Shark ® 200 meter with 60 Hz System, 5 Amp Secondary, V2-V-Switch™ key, 18-60 VDC Power Supply,
100BaseT Ethernet in Card Slot 1 and no card in Card Slot 2)
e
Electro Industries/Gauge Tech
2
3
4
5
Doc# E149701
6
7
2-3
Advertisement
Table of Contents
