Filtering Parameters - Proxim ORiNOCO AP-4000M User Manual

Command Line Interface (CLI)
Parameter Tables
Name
TFTP File Type
IP Access Table Parameters
When creating table entries, you may either specify the argument name followed by argument value or simply enter the
argument value. When only the argument value is specified, then enter the values in the order depicted by the following
table. CLI applies default values to the omitted arguments. Due to the nature of the information, the only argument that
can be omitted is the "comment" argument.
Name
IP Access Table
Table Index
IP Address
IP Mask
Comment (optional)
Status (optional)

Filtering Parameters

Ethernet Protocol Filtering Parameters
Name
Ethernet Filtering
Filtering Interface
Bitmask
Operation Type
Ethernet Filtering Table
Identify the different filters by using the table index.
Name
Ethernet Filtering Table
Table Index
Type
Integer img
config
bootloader
sslcertificate
sslprivatekey
sshprivatekey
sshpublickey
clibatchfile (CLI Batch
File)
cbflog (CLI Batch Error
Log)
Type
Table N/A
Integer User Defined
IpAddress User Defined
IpAddress User Defined
DisplayString User Defined
Integer enable (default)
disable
delete
Type
Group N/A
Interface Bitmask 0 or 2 = No interfaces
(disable)
1 or 3 = Ethernet
4 or 6 = Wireless A
8 or 10 = Wireless B
12 = Wireless A & B
13 or 15 = All interfaces
(default is 15)
passthru
block
Type
Table N/A
N/A N/A
AP-4000/4000M/4900M User Guide
Value Access
RW
Value Access
R
N/A
RW
RW
RW
RW
Value Access
R
RW
RW
Value Access
R
R
CLI Parameter
tftpfiletype
CLI Parameter
mgmtipaccesstbl
index
ipaddr
ipmask
cmt
status
CLI Parameter
etherflt
etherfltifbitmask
etherfltoptype
CLI Parameter
etherflttbl
index
242