Proxim ORiNOCO AP-4000M User Manual page 142

Hide thumbs Also See for ORiNOCO AP-4000M:
Table of Contents

Advertisement

Advanced Configuration
SSID/VLAN/Security
NOTE: When VLAN tagging is enabled, only Key 0 can be configured.
802.1x Station:
Authentication Mode: 802.1x
Cipher: WEP
Encryption Key Length: 64 or 128 Bits.
— If 802.1x is enabled simultaneously with WEP, the 802.1x Station's encryption key length is determined by
the WEP encryption key.
WPA Station:
Authentication Mode: 802.1x
Cipher: TKIP
WPA-PSK Station:
Authentication Mode: PSK
Cipher: TKIP
PSK Passphrase: an 8-63 character user-defined phrase. It is recommended a passphrase of at least 13
characters, including both letters and numbers, and upper and lower case characters, be used to ensure that
the generated key cannot be easily deciphered by network infiltrators.
802.11i Station:
Authentication Mode: 802.1x
Cipher: CCMP based on AES
802.11i-PSK Station:
Authentication Mode: PSK
Cipher: CCMP based on AES
PSK Passphrase: an 8-63 character user-defined phrase. It is recommended a passphrase of at least 13
characters, including both letters and numbers, and upper and lower case characters, to ensure that the
generated key cannot be easily deciphered by network infiltrators.
5. When finished configuring all parameters, click OK.
6. If you selected a Security Mode of 802.1x Station, WPA Station, or 802.11i Station, you must configure a RADIUS
802.1x/EAP server. See the
Security Profile 1 will be used by default for all wireless interfaces.
7. Reboot the AP.
Configuring Radius Profiles
AP-4000/4000M/4900M User Guide
section.
142

Advertisement

Table of Contents
loading

Table of Contents