Proxim ORiNOCO AP-4000M User Manual page 251

Command Line Interface (CLI)
Parameter Tables
Name
Hardware Configuration
Reset Status
Configuration Reset
Password
Security Profile Table
The Security Profile Table allows you to configure security profiles. A maximum of 16 security profiles are supported per
wireless interface.
Each security profile can contain one or more enabled security modes (Non-secure station, WEP station, 802.1x station,
WPA station, WPA-PSK station, 802.11i, 802.11i-PSK). The WEP/PSK parameters are separately configurable for each
security mode. See the command examples in
Name
Security Profile Table
Table Index
Security Mode
Authentication Mode
Cipher
Encryption Key 0
Encryption Key 1
Encryption Key 2
Encryption Key 3
Encryption Transmit Key Integer
Encryption Key Length
PSK Passphrase
Type
Integer enable (1)
disable (2)
DisplayString User Defined
Set Security Profile
Type
Table N/A
Integer 1 - 16 (up to 16 per
interface)
Integer nonsecure
wep
802.1x
wpa
wpa-psk
802.11i
802.11i-psk
Integer none
802.1x
psk
Integer none
wep
tkip
aes
Integer See
Format
Integer See
Format
Integer See
Format
Integer See
Format
0 - 3
Integer 1 (64 bits)
2 (128 bits)
3 (152 bits)
Integer 8 - 64 characters
Value Access
Parameters.
Value Access
Encryption Key
Encryption Key
Encryption Key
Encryption Key
AP-4000/4000M/4900M User Guide
CLI Parameter
R hwconfigresetstatus
RW configresetpasswd
CLI Parameter
R secprofiletbl
RW index
RW secmode
R authmode
R ciphersuite
W encryptkey0
W encryptkey1
W encryptkey2
W encryptkey3
RW encryptkeytx
RW encryptkeylength
W passphrase
251