Proxim ORiNOCO AP-4000M User Manual page 241

Command Line Interface (CLI)
Parameter Tables
SSH Parameters
The following commands enable or disable SSH and set the SSH host key.
Name
SSH Status
SSH Public Host Key
Fingerprint
SSH Host Key Status
The AP SSH feature, open-SSH, confirms to the SSH protocol, and supports SSH version 2. The following SSH clients
have been verified to interoperate with the AP's server. The following table lists the clients, version number, and the
website of the client.
Clients
OpenSSH
Putty
Zoc
Axessh
For key generation, only the OpenSSH client has been verified.
Auto Configuration Parameters
These parameters relate to the Auto Configuration feature which allows an AP to be automatically configured by
downloading a specific configuration file from a TFTP server during the boot up process.
Name
Auto Configuration
Auto Configuration Status Integer
Auto Config File Name
Auto Config TFTP Server
IP Address
TFTP Server Parameters
These parameters relate to upload and download commands.
When you execute an upload and/or download Command, the specified arguments are stored in TFTP parameters for
future use. If nothing is specified in the command line when issuing subsequent upload and/or download commands, the
stored arguments are used.
Name
TFTP
TFTP Server IP Address IpAddress
TFTP File Name
Type
Integer enable
disable
DisplayString AP Generated
Integer create
delete
Version
V3.4-2 http://www.openssh.com
Rel 0.53b http://www.chiark.greenend.org.uk
5.00 http://www.emtec.com
V2.5 http://www.labf.com
Type
Group N/A
enable (default)
disable
DisplayString User Defined
IpAddress User Defined
Type
Group N/A
User Defined
DisplayString User Defined
AP-4000/4000M/4900M User Guide
Value Access
RW
RW
RW
Website
Value Access
R
RW
RW
RW
Value Access
R
RW
RW
CLI Parameter
sshstatus
sshkeyfprint
sshkeystatus
CLI Parameter
autoconfig
autoconfigstatus
autoconfigfilename
autoconfigTFTPaddr
CLI Parameter
tftp
tftpipaddr
tftpfilename
241