Proxim ORiNOCO AP-4000M User Manual page 107

Advanced Configuration
Alarms
RFC 1215-Trap
coldStart
linkUp
linkDown
Bridge MIB (RFC 1493) Alarms
New Root
topologyChange
All these alarm groups correspond to System Alarms that are displayed in the
that are sent by the AP to the SNMP managers specified in the
Alarm Host Table
To add an entry and enable the AP to send SNMP trap messages to a Trap Host, click Add, and then specify the IP
Address and Password for the Trap Host.
NOTE: Up to 10 entries are possible in the Alarm Host table.
• IP Address: Enter the Trap Host IP Address.
• Password: Enter the password in the Password field and the Confirm field.
• Comment: Enter an optional comment, such as the alarm (trap) host station name.
To edit or delete an entry, click Edit. Edit the information, or select Enable, Disable, or Delete from the Status
drop-down menu.
Trap Name
Trap Name
Description
AP is on or rebooted
AP's Ethernet interface link is up (working)
AP's Ethernet interface link is down (not working) Informational
Description
AP has become the new root in the Spanning
Tree network
Trap is not sent if a newRoot trap is sent for the
same transition
Alarm Host Table.
AP-4000/4000M/4900M User Guide
System Status Screen, including the traps
Severity Level
Informational
Informational
Severity Level
Informational
Informational
107