Proxim ORiNOCO AP-4000M User Manual page 81

Advanced Configuration
Interfaces
• Disable Client Access on No Uplink Connection: When this option is enabled, the AP will not provide wireless
connections to clients on both radios if the unit does not have an uplink connection.
• Notify Clients on Uplink Change: When this option is enabled, the AP will send a deauthentication message to
currently connected clients when its uplink changes. This allows clients to restart a fresh connection, renewing their IP
addresses if necessary.
For more information on Mesh, see Mesh Networking.
AP-4000/4000M/4900M User Guide
81