Proxim ORiNOCO AP-4000M User Manual page 72

Advanced Configuration
Interfaces
Web Interface
The HTTP Interface (Web browser Interface) provides easy access to configuration settings and network statistics from
any computer on the network. You can access the HTTP Interface over your LAN (switch, hub, etc.), over the Internet, or
with a "crossover" Ethernet cable connected directly to your computer's EthernetPort
To configure the HTTP (Web) interface, click Configure>Interfaces>Ethernet
Figure 4-18 Web Interface configuration
NOTE: By default, the speed and transaction mode is auto-speed-auto-duplex and VLAN mode is Transparent.
NOTE: Ethernet VLAN is Enabled and Mgnt VID is not present in Access/Trunk table, user can't be able to manage AP
using Ethernet interface.
Based upon the modes you select, the Access VLAN ID, Access Priority and the VLAN text fields also vary, either
enabled or disabled, or both enabled and disabled. The detail is mentioned below:
• When VLAN Mode is Transparent, all the text boxes from VLAN 1 to VLAN 16, Access VLAN ID and Access VLAN
Priority are disabled.
• When VLAN Mode is Trunk, text boxes from VLAN 1 to VLAN 16 are enabled and Access VLAN ID and Access VLAN
Priority are disabled.
AP-4000/4000M/4900M User Guide
.
72