Proxim ORiNOCO AP-4000M User Manual page 165
Hide thumbs
Also See for ORiNOCO AP-4000M:
- User manual (251 pages) ,
- Specifications (3 pages) ,
- Datasheet (2 pages)
Table of Contents
Advertisement
Monitoring
Mesh Statistics
Figure 5-13 Mesh Statistics Link Test Sub-Tab
To execute a Link Test, set the following parameters:
•
Test Type: Tree Type or Neighbor Type
•
Destination System Name: The destination Mesh unit.
•
Test Traffic Rate: The number of frames per second to test.
•
Frame Size: The size of each frame in test.
•
Test Duration: The duration for the entire whole test
When a test is running, it will appear in the "Currently RUnning Mesh Link Test" section of the page. The "Time to Finish"
field updates on each page refresh.
Upon completion of a test, the test will appear under the "Mesh Link Test Results" section of the page. To view full results,
select radio button of the desired test; results will be displayed in a new window., new window will open.
NOTES:
•
No more 10 tests can be running and complete simultaneously. (For instance, if there are 5 tests running and 5 tests
finished, when a sixth test begins to run, the oldest result will be deleted.)
•
Any topology change will delete all Tree Type tests (running or complete).
AP-4000/4000M/4900M User Guide
165
Advertisement
Table of Contents
