Minimum Software Requirements; Power Supply Cords For Ac Power Supplies - Extreme Networks BlackDiamond 8806 Hardware Installation Manual

Minimum Software Requirements

The Extreme Networks power supplies have the following minimum software requirements:
600/900 W AC power supply
●
For the system to recognize a 600/900 W AC power supply, the MSM installed in your
BlackDiamond 8806 switch requires ExtremeXOS version 11.6.1 (or later). In ExtremeXOS releases
11.3.4, 11.4.2, and 11.5.1, the 600/900 W AC power supply is disabled on all chassis. In ExtremeXOS
releases earlier than those, the software does not recognize the 600/900 W AC power supply and the
power supply will not be budgeted properly, possibly resulting in power supply shutdown and/or
chassis reboot.
700/1200 W AC power supply
●
The 700/1200 W AC power supply is supported by all versions of ExtremeXOS software.
1200 W DC power supply
●
For the system to recognize the 1200 W DC power supply, the MSM in your BlackDiamond 8800
series switch must be running ExtremeXOS version 11.3 or later.

Power Supply Cords for AC Power Supplies

The AC power supplies used with the BlackDiamond 8800 series switches can use either 110 V AC or
220 V AC power supply cords.
cords when used with each AC power supply.
Power supply cords are not shipped with the AC power supplies. To purchase an AC power cord,
contact your local Extreme Networks Channel Account Manager or Sales Manager, or purchase a cord
from your local supplier. The power cord must meet the requirements listed in
Cords" on page 179.
Table 20: AC Power Supply Cords
Maximum DC Output Power
600/900 W AC
Cord Type Power Supply
110 V AC 600 W
220 V AC 900 W
WARNING!
Be sure that the source outlet is properly grounded before plugging the AC power cord into the Extreme
Networks AC power supply.
BlackDiamond 8800 Series Switches Hardware Installation Guide
Table 20 shows the maximum DC power output allowed by these power
700/1200 W AC
Power Supply
700 W
1200 W
"Selecting Power Supply
103