Removing The Blackdiamond 8806 Psu Cover - Extreme Networks BlackDiamond 8806 Hardware Installation Manual

BlackDiamond PSU Covers
5 Push the top of the cover into place against the front of the switch until the latching tabs click into
place (Figure 105).
Figure 105: Latching the PSU Cover

Removing the BlackDiamond 8806 PSU Cover

To remove the PSU cover:
1 Press down on the latching tab at each side of the top.
2 With the latching tabs pressed down, pull outward on the top edge of the cover to disengage it from
the switch chassis.
3 Lift the cover off the AC cord retainer.
146
BlackDiamond 8800 Series Switches Hardware Installation Guide
EX_188