G48Te2 I/O Module
The G48Te2 I/O module
RJ-45 connectors.
Figure 30: G48Te2 I/O Module
o d u l e s t a t u s L E D s
You can add an optional S-POE daughter card to the G48Te2 I/O module to provide Power over
Ethernet (PoE) functions in this module. With an installed S-POE card, the ports can deliver PoE to an
attached device, in addition to the usual Ethernet connection, using a single cable. The G48Te2 I/O
module supports the IEEE 802.3af PoE specification.
In the default configuration of the G48Te2 I/O module, all ports:
Are added to the default VLAN as untagged
●
Inherit the properties of the default VLAN (for example, protocol type and VLANid)
●
Operate in autonegotiation mode
●
The G48Te2 I/O module has the following LEDs:
PoE present
●
Module status
●
Module diagnostics
●
Port status
●
For information about the LEDs and their activity on the G48Te2 I/O module, see
on page
53.
BlackDiamond 8800 Series Switches Hardware Installation Guide
(Figure
28) has 48 autosensing 10/100/1000BASE-T ports that use standard
1 0 / 1 0 0 / 1 0 0 0 B A S E - T
p o r t s
A S P 0 5 2
"I/O Module LEDs"
47