Extreme Networks BlackDiamond 8806 Hardware Installation Manual page 125

Figure 83: Captive Screw on a BlackDiamond 8000 Series Blank Front Panel
3 Remove the blank front panel from the front of the BlackDiamond switch (see
Figure 84: Removing a Blank Front Panel from a BlackDiamond 8800 series Switch
4 Install an I/O module or MSM in the open slot as described in
Series Module" on page
NOTE
Leave the ESD-preventive wrist strap permanently connected to the switch, so that the strap is always
available when you need to handle ESD-sensitive components.
BlackDiamond 8800 Series Switches Hardware Installation Guide
ASP019
ASP020
115.
Figure 84).
"Installing a BlackDiamond 8000
125