Blackdiamond 8806 Psu Cover; Installing The Blackdiamond 8806 Psu Cover - Extreme Networks BlackDiamond 8806 Hardware Installation Manual

BlackDiamond PSU Covers

BlackDiamond 8806 PSU Cover

The BlackDiamond 8806 PSU cover fits onto the AC power cord management bracket and snaps
into place on the front of the BlackDiamond 8806 switch. The PSU cover kit includes the following
parts (Figure 102):
PSU cover
●
AC power cord management bracket with captive retaining screws
●
Figure 102: BlackDiamond 8806 PSU Cover Kit

Installing the BlackDiamond 8806 PSU Cover

To install the PSU cover:
1 If necessary, remove the installed AC power cord retainer.
2 Make sure that all required AC power cords are connected to the AC power input connectors on the
switch.
3 Attach the AC power cord retainer to the switch:
a Place the retainer against the front of the switch as shown in
retainer engages all the power cord connectors.
b Align and tighten the captive retaining screws.
144
Figure
BlackDiamond 8800 Series Switches Hardware Installation Guide
EX_185
103. Make sure that the