Network Settings - Minicom Smart CAT5 Switch 16 IP Operating Manual

.
OPERATING GUIDE
Using a function. allow access means you can use it. deny access means you
cannot use it.
Group setting – Use the access rights inherited from the group(s), the user
belongs to.
3. Select the desired permission.
4. To add the right, click Add.
To remove the right, check the Delete Entry box.
5. Click Apply.
52.

Network Settings

From the Smart 16 IP Menu choose Network Settings. The Network Settings
appear. See Figure 19.
Figure 19 The Network Settings
In the Network Settings panel you can change the network parameters.
The initial IP configuration is usually done directly at the host system. However
you can also connect to the Smart 16 IP using its pre-configured IP settings.
Warning! Changing the network settings of Smart 16 IP may result in losing the
connection. If you remotely change the settings ensure that all values will give
you access to the Smart 16 IP.
.
30