Snmp Settings - Minicom Smart CAT5 Switch 16 IP Operating Manual

56.

SNMP Settings

The following information is available via SNMP:
•
Serial number
•
Firmware version
•
MAC address / IP address / Netmask / Gateway of LAN interface
•
Configured users
•
Currently active users with login time (login time is only valid if time is
synchronized on Smart 16 IP)
•
Server's power state
•
The following actions can be initiated via SNMP:
•
Reset server
•
Power on/off server
•
Reset Smart 16 IP
The following events are reported by Smart 16 IP via SNMP:
•
Login trial at Smart 16 IP failed
•
Login trial at Smart 16 IP succeeded
•
Denying access to a particular action.
•
Server was reset.
•
Server was powered on/off
From the Smart 16 IP Menu choose SNMP settings. The SNMP Settings appear.
See Figure 27.
OPERATING GUIDE
.
42
.