Web Browser Interface; Browser Http Interface; Browser Tftp Interface - Cisco Aironet 1100 Series Installation And Configuration Manual

Hide thumbs Also See for Aironet 1100 Series:
Table of Contents

Advertisement

Chapter 21
Troubleshooting

Web Browser Interface

You can also use the Web browser interface to reload the access point image file. The Web broswer
interface supports loading the image file using HTTP or TFTP interfaces.
Note

Browser HTTP Interface

The HTTP interface enables you to browse to the access point image file on your PC and download the
image to the access point. Follow the instructions below to use the HTTP interface:
Step 1
Open your Internet browser. You must use Microsoft Internet Explorer (version 5.x or later) or Netscape
Navigator (version 4.x).
Step 2
Enter the access point's IP address in the browser address line and press Enter. An Enter Network
Password screen appears.
Step 3
Enter your username in the User Name field.
Step 4
Enter the access point password in the Password field and press Enter. The Summary Status page
appears.
Step 5
Click the System Software tab and then click Software Upgrade. The HTTP Upgrade screen appears.
Step 6
Click the Browse button to locate the image file on your PC.
Step 7
Click the Upload button.
For additional information, click the Help icon on the Software Upgrade screen.

Browser TFTP Interface

The TFTP interface allows you to use a TFTP server on a network device to load the access point image
file. Follow the instructions below to use a TFTP server:
Open your Internet browser. You must use Microsoft Internet Explorer (version 5.x or later) or Netscape
Step 1
Navigator (version 4.x).
Enter the access point's IP address in the browser address line and press Enter. An Enter Network
Step 2
Password screen appears.
Enter your username in the User Name field.
Step 3
Enter the access point password in the Password field and press Enter. The Summary Status page
Step 4
appears.
Click the System Software tab and then click Software Upgrade. The HTTP Upgrade screen appears.
Step 5
Click the TFTP Upgrade tab.
Step 6
Enter the IP address for the TFTP server in the TFTP Server field.
Step 7
OL-2851-01
Your access point configuration is not changed when using the browser to reload the image file.
Cisco Aironet 1100 Series Access Point Installation and Configuration Guide
Reloading the Access Point Image
21-7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents