Cisco Aironet 1100 Series Installation And Configuration Manual page 135

Chapter 10 Configuring Authentication Types
Table 10-2 Client and Access Point Security Settings (continued)
Security Feature
EAP-SIM authentication
If using ACU to
configure card
If using Windows XP
to configure card
OL-2851-01
Matching Access Point and Client Device Authentication Types
Client Setting
Enable Host Based EAP and Use
Dynamic WEP Keys in ACU and
select Enable network access
control using IEEE 802.1X and
SIM Authentication as the EAP
Type in Windows 2000 (with
Service Pack 3) or Windows XP
Select Enable network access
control using IEEE 802.1X and
SIM Authentication as the EAP
Type
Cisco Aironet 1100 Series Access Point Installation and Configuration Guide
Access Point Setting
Set up and enable WEP with full
encryption and enable EAP and
Open authentication
Set up and enable WEP with full
encryption and enable Require
EAP and Open Authentication
10-11