Cisco Aironet 1100 Series Installation And Configuration Manual page 247

Chapter 19 Managing Firmware and Configurations
Downloading an Image File by Using RCP
You can download a new image file and replace or keep the current image.
For the download and upload algorithms to operate properly, do not rename image directories.
Caution
Beginning in privileged EXEC mode, follow Steps 1 through 6 to download a new image from an RCP
server and overwrite the existing image. To keep the current image, skip Step 6.
Command
Step 1
Step 2
Step 3
configure terminal
Step 4 ip rcmd remote-username username
Step 5 end
OL-2851-01
Purpose
Verify that the RCP server is properly configured by
referring to the
File by Using RCP" section on page
Log into the access point through a Telnet session.
Enter global configuration mode.
This step is required only if you override the default remote
username (see Steps 4 and 5).
(Optional) Specify the remote username.
Return to privileged EXEC mode.
Cisco Aironet 1100 Series Access Point Installation and Configuration Guide
Working with Software Images
"Preparing to Download or Upload an Image
19-27.
19-29