Using The Desktop Holster - Cisco Aironet 1100 Series Installation And Configuration Manual

Using the Desktop Holster

Using the Desktop Holster

Follow these steps to mount the access point on a desktop or other horizontal surface using the supplied
desktop holster.
Select a suitable location to place the holster.
Step 1
Connect the Ethernet and power cables.
Step 2
•
Step 3 Position the holster so that its back side is facing you.
Step 4 Insert the access point into the holster while guiding the cables so that they do not interfere with the sides
of the holster. You will hear a click when the access point locks into place. See
Figure D-7
Cisco Aironet 1100 Series Access Point Installation and Configuration Guide
D-8
If you are going to secure the access point with a Kensington lock, attach it now.
Desktop Holster
Appendix D Mounting Instructions
Figure D-7.
OL-2851-01