Using Ftp To Access The Mib Files - Cisco Aironet 1100 Series Installation And Configuration Manual

Using FTP to Access the MIB Files

•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Using FTP to Access the MIB Files
Follow these steps to obtain each MIB file by using FTP:
Use FTP to access the server ftp.cisco.com.
Step 1
Log in with the username anonymous.
Step 2
Step 3 Enter your e-mail username when prompted for the password.
Step 4 At the
Use the get MIB_filename command to obtain a copy of the MIB file.
Step 5
You can also access information about MIBs on the Cisco web site:
Note
http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml
Cisco Aironet 1100 Series Access Point Installation and Configuration Guide
F-2
CISCO-PROCESS-MIB
CISCO-PRODUCTS-MIB
CISCO-SMI-MIB
CISCO-TC-MIB
CISCO-SYSLOG-MIB
ENTITY-MIB
IF-MIB
OLD-CISCO-CHASSIS-MIB
OLD-CISCO-SYS-MIB
OLD-CISCO-SYSTEM-MIB
OLD-CISCO-TS-MIB
RFC1213-MIB
RFC1398-MIB
SNMPv2-MIB
SNMPv2-SMI
SNMPv2-TC
prompt, change directories to /pub/mibs/v1 or /pub/mibs/v2.
ftp>
Appendix F Supported MIBs
OL-2851-01