Features; Hardware Features; Single Radio Operation; Ethernet Port - Cisco Aironet 1100 Series Installation And Configuration Manual

Features

Features
This section describes access point features. Refer to
list of access point specifications.

Hardware Features

Key hardware features of the 1100 series access point include:
•
•
•
•
•
•
Figure 1-1
Figure 1-1
1
2
3

Single Radio Operation

The access point contains a 2.4-GHz radio in a mini-PCI slot and two 2.2-dBi dipole integrated antennas.
You can perform a field upgrade to the mini-PCI radio and antennas to support future radio technologies.

Ethernet Port

The auto-sensing Ethernet port accepts an RJ-45 connector, linking the access point to your 10BASE-T
or 100BASE-T Ethernet LAN. The access point can receive power through the Ethernet cable from a
power injector, switch, or power patch panel. The Ethernet MAC address is printed on the label on the
back of the access point.
Cisco Aironet 1100 Series Access Point Installation and Configuration Guide
1-2
Single Radio Operation, page 1-2
Ethernet Port, page 1-2
Status Indicators, page 1-3
Power Sources, page 1-3
UL 2043 Certification, page 1-4
Anti-Theft Features, page 1-4
shows the location of some of the hardware features.
Access Point Layout and Connectors
1 2 3 4 5
48 VDC power port
Ethernet port (RJ-45)
Cable lock slot
Appendix G, "Access Point Specifications,"
6
4 Mode button
5 Status LEDs
6
Antenna
Chapter 1 Overview
for a
OL-2851-01