Using The Web Browser Interface - Cisco Aironet 1250 Series Manual

Step 4 Continue holding the MODE button until the Ethernet LED turns
amber (approximately 2 to 3 seconds), then release the button.
Step 5 After the access point reboots, you must reconfigure it using the
web browser interface, the Telnet interface, or connecting to the
access point console port.

Using the Web Browser Interface

Follow these steps to delete the current configuration and return all access
point settings to factory defaults using the web browser interface:
Step 1
Open your Internet browser. You must use Microsoft Explorer
(version 5.x or later) or Netscape Navigator (version 4.x or later).
Step 2
Enter the access point IP address in the browser address line, and
press Enter. An Enter Network Password window appears.
Step 3
Enter your username in the User Name field.
Step 4
Enter your password in the Password field and press Enter. The
Summary Status page appears.
Step 5
Click System Software. The System Software page appears.
Step 6 Click System Configuration. The System Configuration page
appears.
32
78-17831-01