Ftp:[[//Username[:Password]@Location]/Directory] - Cisco Aironet 1100 Series Installation And Configuration Manual

Chapter 19 Managing Firmware and Configurations
Command
Step 7 archive download-sw /overwrite /reload

ftp:[[//username[:password]@location]/directory]

/image-name.tar
Step 8
archive download-sw /leave-old-sw /reload
ftp:[[//username[:password]@location]/directory]
/image-name.tar
To avoid an unsuccessful download, use the archive download-sw /safe command, which downloads
Note
the image first and does not delete the current running version until the download succeeds.
The download algorithm verifies that the image is appropriate for the access point model and that enough
DRAM is present, or it aborts the process and reports an error. If you specify the /overwrite option, the
download algorithm removes the existing image on the Flash device, whether or not it is the same as the
new one, downloads the new image, and then reloads the software.
Note If the Flash device has sufficient space to hold two images and you want to overwrite one of these images
with the same version, you must specify the /overwrite option.
OL-2851-01
Purpose
Download the image file from the FTP server to the access
point, and overwrite the current image.
The /overwrite option overwrites the software image in
•
Flash with the downloaded image.
The /reload option reloads the system after downloading
•
the image unless the configuration has been changed and
not saved.
For //username[:password], specify the username and
•
password; these must be associated with an account on the
FTP server. For more information, see the
Download or Upload an Image File by Using FTP" section
on page 19-23.
• For @location, specify the IP address of the FTP server.
For directory/image-name.tar, specify the directory
•
(optional) and the image to download. Directory and
image names are case sensitive.
Download the image file from the FTP server to the access
point, and keep the current image.
• The /leave-old-sw option keeps the old software version
after a download.
• The /reload option reloads the system after downloading
the image unless the configuration has been changed and
not saved.
For //username[:password], specify the username and
•
password. These must be associated with an account on
the FTP server. For more information, see the
to Download or Upload an Image File by Using FTP"
section on page
For @location, specify the IP address of the FTP server.
•
For directory/image-name.tar, specify the directory
•
(optional) and the image to download. Directory and
image names are case sensitive.
Cisco Aironet 1100 Series Access Point Installation and Configuration Guide
Working with Software Images
19-23.
"Preparing to
"Preparing
19-25